DigiTech TRIO+ Band Creator + FS3X Footswitch - Secondhand

Full Description

A backing band in a box

The DigiTech TRIO+ Band Creator w/ FS3X Footswitch comes in a compact sizes, but delivers a massive performance. Able to instantly create inspiring drum and bass patterns which match your playing style – simply push the band footswitch and strum away to tech the pedal your desired chords and rhythm. Adjust the drum and bass knobs to find the perfect level in your mix, and use the sample bass button to cycle through different bass modes – going from an active bass line to an incredibly simplified version.

The DigiTech TRIO+ Band Creator w/ FS3X features 12 different genres – each consisting of 12 song styles with both 3 / 4 and 4 / 4 time-signatures to play around with. You can also create up to five different parts which can be recalled at instantly or as pre-programmed as a sequence. This is perfect for creating an entire song with an intricate structure.

Create full songs on-the-fly

The DigiTech TRIO+ Band Creator is unlike its smaller brother (the TRIO), as it is equipped with a looper to enhance your playing experience. Engage the looper to record up to 30 seconds with unlimited overdubs.

You can also record loops by themselves or with the backing band. Another great feature of the pedal is the built-in effects – which can be accessed via the FX button. If you have your own effects, you can simply plug your stompboxes into the FX Loop and start playing away.

Versatile connectivity

The DigiTech TRIO+ Band Creator w/ FS3X Footswitch has a wide range of connections that make it even more suited to live performance. A headphone output with separate level control provides a useful addition for silent practice. The output can be separated into guitar amp and mixing desk outputs. Your guitar tone can remain unaffected and be sent to you guitar rig, while the band output can maintain a full frequency response to be used directly with a PA setup.

Included FS3X Footswitch

The addition of DigiTech’s FS3X 3-button footswitch provides you with quick, easy and hands-free access to a variety of the SDRUM’s functions – perfect for making adjustments mid-song. Three modes provide you with different functions – allowing for the perfect setup to suit your style.

In live mode, the footswitch lets you select the next style or go to the next part of the song. The third footswitch toggles the Trio+’s all the time mode. The second mode (tabletop) provides access to the looper and band footswitch functions, with the middle footswitch letting you switch to the next part. The third mode (Live Mixer) sets each footswitch as a mute – letting you mute the bass, drums or both when desired.

Specifications

Interface

• Controls:
  • Tempo
  • Genre
  • Style
  • Loop
  • Bass
  • Drums
  • Headphone Volume
• Backlit Buttons:
  • Guitar FX
  • Seq.
  • Part 1-5
  • Alt Time
  • Song
  • Simple Bass
• Footswitches: Looper, Band
• LEDs:
  • Genre Type
  • Style 1-12
  • Audiolastic
  • Looper
  • Band
• Jacks:
  • Power
  • Control In
  • Guitar In
  • FX Return
  • FX Send
  • Amp Out
  • Mixer Out
  • Headphone
• Other: Mini USB Port, MicroSD Card Slot

Connectivity

• Guitar Input:
  • Type: Unbalanced, 1/4'' TS
  • Impedance: 1 MOhm
• FX Return:
  • Type: Unbalanced, 1/4'' TS
  • Impedance: 1 MOhm
• Control Input: 1/4'' TRS
• Amp Output:
  • Type: Unbalanced, 1/4'' TS
  • Impedance: 1 kOhm
  • Frequency Response: 25 Hz–20 kHz
• Mixer Output:
  • Type: Unbalanced, 1/4'' TRS
  • Impedance: 1 kOhm
  • Frequency Response: 25 Hz–20 kHz
• FX Send Output:
  • Type: Unbalanced, 1/4'' TS
  • Impedance: 1 kOhm
  • Frequency Response: 25 Hz–20 kHz
• Headphone Output:
• Type: 1/8'' (3.5 mm) Stereo Mini Jack
• Impedance: 120 Ohms
• Frequency Response: 20 Hz–20 kHz

Technical

• Bit Depth: 24-bit
• Sample Rate: 44.1 kHz
• Signal-To-Noise Ratio: 110 dB, A-Weighted
• Max Recording Time: 30 Secs Per Song Part (Based on a minimum 50 BPM and 48 bars per part)
• USB Type: Mini-B
• SD Card Type: microSDHC, Class 10
• Min/Max Storage Space: 8 GB/32 GB

Power Requirements

• Power Requirements: 9 VDC External Power Adapter (Included)
• Power Consumption: 7.2 W
• Current Draw: 800 mA
• Power Adapter Model: PS0913DC-04 (US, JA, EU, AU, UK)
• Power Adapter Output: 9 VDC 1.3 A

Dimensions

• Length: 5.4'' (137.2mm)
• Width: 4.25'' (108mm)
• Height: 2.5'' (63.5mm)
• Weight: 0.66 kg (1.46 lbs)