EarthQuaker Devices Levitation Reverb

Full Description

Four knobs and one toggle control quite a bit more than you might first expect. Fancy a rock 'n' roll slap back small room sound? Set all of your dials to zero and use the mix to bring in the sound of room free of anything but a guitar and amp. Want to spiral around in infinite spatial oscillations? Flip the switch to long, rack up the atmosphere and decay then tune out. Dial in a bright chiming slap back by setting the tone all the way anti-clockwise and decrease the decay. For a rattling, full-bandwidth assault, max out everything and let it rip.

A bright LED indicator means you always stay in control even on the darkest of stages, a true bypass signal path ensures an amazingly pure and natural tone straight from your instrument, and to top it all off the pedal is handmade in Ohio, USA to a supreme level of quality. Look no further than the Levitation if you're looking for that ringing, atmospheric reverb.

Controls

• Length (Toggle): Broad stroke control for decay time. Shorter to left, longer to the right.
• Decay: Controls length of reverb decay. Longer clockwise, shorter anti-clockwise.
• Atmosphere: Harmonic regeneration control, feeds the upper frequencies of the reverb trails back through to create a more harmonic (ringing) reverb. More atmosphere clockwise, less anti-clockwise.
• Mix: Controls how much wet signal is blended in with the dry. More reverb clockwise, less anti-clockwise.
• Tone: Input bandwidth control for the reverberated signal. All the way clockwise reduces entire low end content to make a brighter reverb, turning anti-clockwise allows more low end to pass through resulting in a thicker reverberated tone.

Specifications

• Size: 4 5/8" x 2 1/2" x 2.25" with knobs
• Connections: ¼" input and output
• Power: Requires 9V DC power supply
• Input impedance: 1MΩ
• Output impedance: >1KΩ
• Current Draw: 50 mA
• Construction: Built by hand in Ohio, USA