DISC Aviom D400-Dante A-Net Distributor

Full Description

Make a connection

The missing link in personal mixing. The Aviom D400-Dante A-Net Distributor is ideal for connecting networked audio to your personal mixers (such as the Aviom A320 and A360). Send up to 32 channels to your mixer over a single Cat-5 cable in an instant. And with no need to worry about IP addressing or routing, set up is simple. Rounded off with precision mechanical design and thermal management, the D400-Dante gives you unparalleled performance.

Expand your network

Truly modular design. Aviom have created their A-Net enabled range of products with complete compatibility in mind. You can easily link multiple Aviom D400s together. Ideal for systems using over 8 personal mixers. By daisy-chaining from output to input you can deliver audio and power to your mixer.

Dante without the Inferno

No hassle Dante compatibility. Right out of the box. An additional ultra low-latency digital audio network at your disposal. You can easily integrate with Dante network components and allow up to 32 channels to be distributed across a huge selection of hardware.

With free Dante Controller software for Mac or PC, you can control your routing easily. Every device is automatically configured and discovered, leaving you with more time to focus on getting the best sound possible.

Features

• Distributes power and audio to up to eight A320 and A360 Personal Mixers
• One unpowered Pro16e A-Net Out for thru connections
• Stereo Link DIP switches simplify stereo channel assignments
• Supports legacy A-16II and A-16R Personal Mixers
• Direct connectivity to a Dante™ audio network
• Support for up to 32 Dante network channels

Specifications

• A-Net Out to Personal Mixers:
  • Eight RJ45 connectors, powered
  • Compatible with A-16II, A320, and A360 Personal Mixers
• A-Net Out:
  • Pro16e A-Net
  • RJ45 connector, unpowered
  • Supports system expansion and the A-16II, A320, and A360 Personal Mixers
• LEDs:
  • Power On (red)
  • Network Sync (green)
• Stereo Link: Two 8-position DIP switch blocks (1-16, 17-32)
• Output Voltage for Personal Mixers: 24VDC, 0.5 amp transmitted over the Cat-5e cable
• A-Net Cables: Front Panel Connections: Shielded Cat-5e (or better) cable must be used to stay below the CISPR 22 Class B, ICES-003, and FCC 47 CFR Part 15 Class B emissions limits. Unshielded Cat-5e cable may be used on all other network connections
• Power Supply: Internal, IEC connector
• Input Voltage: 100-120 VAC or 200-240 VAC (with selector switch); 50-60Hz @220 W max
• AC Fuse Types:
  • 115V range: T2.5AL/250V, slow-acting
  • 230V range: T1.25AL/250V; slow-acting
• Dante Interface: 32 channels (44.1/48kHz Sample Rate only)
• Dante Primary I/O: RJ45 connector
• Dante Secondary I/O: RJ45 connector
• Dante LEDs:
  • Network Activity (green)
  • 1 GB Network Connection Active (yellow)
• Static IP Support: Yes
• AES67 Support: Yes
• Dimensions: 482.6 x 182 x 88.9 mm
• Weight: 5.44 kg