Focusrite iTrack Dock iPad Recording Interface - Nearly New

Full Description

The Focusrite iTrack Dock is at the heart of your Lightning iPad recording studio. Comprehensive but simple to use, the iTrack Dock features two line inputs and an instrument DI with plenty of headroom and stereo monitor outputs with 105dB of dynamic range.

There are two independently-controlled headphone outputs and a USB port for class-compliant MIDI instruments and controllers. iTrack Dock gives you everything you need to record, monitor and control music on your iPad wih precision Focusrite digital conversion and their well-loved mic preamps.

Made for your iPad, iTrack Dock carries Apple™-certified status. Compatible with any Lightning iPad (4th Generation, Air, mini and mini with retina display), the sleek, modular design allows you to slide the Lightning connector up and down to accomodate any sized iPad.

The two Focusrite pre-amps are also featured in the Scarlett range and include 48V phantom power for use with condenser microphones. Focusrite's unique Gain Halos are also present, they glow green for a healthy signal and red if it's too hot.

iTrack Dock works with all Core Audio apps, from Garageband to Cubasis and beyond. Tape by Focusrite is included, offering instant recording, mastering and sharing without the complexities of traditional music-making software. You can input guitar with plenty of clean, clear headroom, capturing both loud and quiet guitars with stunning clarity.

The main monitor outputs on balanced 1/4" TRS connectors and large-diameter level control knob, plus a stereo headphone output with its own level controls. They deliver more than enough power for your headphones and powered monitor speakers.

This item was returned unwanted from a customer. The original boxing is scuffed. Otherwise, the unit itself looks and operates as new, and has only been used a couple of times.

Features/Specifications

Mic

• Frequency Response: 20Hz - 20kHz +/- 0.2 dB (minimum gain)
• THD+N: < -99dB (minimum gain, -1dBFS input with 20Hz/20kHz bandpass filter)
• Equivalent Input Noise (EIN): < -125dBu CCIR-RMS (measured at maximum gain with 150 ohm termination)
• Gain Range: -4dB to +46dB (dBFS / dBu) ±1dB
• Max Input Level: >+4dBu (at 1 THD)

Line

• Frequency Response: 20Hz - 20kHz +/- 0.2dB (minimum gain)
• THD+N: < -98dB (min gain, -1dBFS at output and 20Hz/20kHz bandpass filter)
• Noise (NiPoS): <-104 dBFS CCIR-RMS (measured at min. gain with 50 ohm termination)
• Gain Range: -22dB to +28dB (dBFS / dBu) ±1dB
• Max Input Level: >+21dBu (at 1 THD)

Instrument

• Frequency Response: 20Hz - 20kHz +/- 0.2dB (minimum gain)
• THD+N: <-90dB (min gain, measured at Max Input Level -1dB, 20Hz/20kHz bandpass filter)
• Noise: <-104dBu CCIR-RMS (measured at min. gain)
• Gain Range: -16dB to +34dB (dBFS / dBu) ±1dB
• Max Input Level: >+14dBu (at 1 THD)

Analog Output Performance

• Nominal Output Level: 0dBFS = >+10dBu, balanced / 0dBFS = >+4bBu, unbalanced
• Frequency Response: 20Hz - 20kHz +/- 0.2dB
• THD+N: < -100dB, balanced (0dBFS input 20Hz/20kHz bandpass filter)

Digital Performance

• Clock sources: Internal clock only
• D-A Dynamic Range: 105dB 'A-weighted' (all outputs).  Converter chipset D-A dynamic range 114dB
• Supported sample rates: 44.1 KHz, 48 KHz, 96 KHz 24 Bit

Input Metering

• Ring LED lit Green: Signal present (-24 dBFS)
• Ring LED lit Red: Signal overload (0dBFS), peak held for approximately 1 second

Dimensions and Weight

• Height: 64mm
• Width: 280mm
• Depth: 168mm
• Weight: 0.7kg