OTO Machines Bébé Chérie Analog Mixer

Full Description

Hot pink analog mixer

Many compact synths and music devices utilise 3.5mm TRS outputs. The OTO Machines Bébé Chérie is a six-channel fully analog mixer that hosts six 3.5mm TRS inputs. The Bébé Chérie has two types of channels, the first four channels have a variable input gain with a +34dB maximum and an asymmetrical diode clipper that adds harmonic distortion to your sounds, giving them unique depth and charisma. The first four channels also feature a tilt EQ that is flat when set to the middle. that depending on the direction you turn it, supplements or attenuates the high or low frequencies; turn the tilt EQ left to boost the low and reduce the high frequencies, turning the dial right will have the opposite effect.

The tilt EQ is flat when the dial is set to the middle. All four of these channels can be set to either a stereo or mono input. The other two channels don't have distortion, so you can use these for audio signals you want to maintain the purity of. These two channels are equipped with a two-band EQ and the input gain can be set to either 0 or +10dB. All six channels have their own independent volume level control.

Compact and contemporary design

The volume output of the Bébé Chérie mixer is controlled by the master bus section, here you'll find a master volume knob, along with a compressor and a Bliss pot high-frequency boost. The Compressor has a three-to-one ratio and is ideal for mixdown compression, as it has a fast attack time and a moderate release. Enhance the high frequencies of the master volume with the Bliss pot. This controls a high-frequency enhancer circuit that can be used to accentuate your high-end signals, making them bright and sharp. The headphones output is identical to the master volume output, running on the same amplifier. This means you can also use the headphones output as a secondary output, with the same levels and effects as the master. Another feature of the Bébé Chérie is that when any channel is muted, it will be routed to an alternative output that can be used for recording or to send the channel to an exterior FX unit.

Measuring less than 30cm in diameter, the Bébé Chérie is compact enough to fit in a standard backpack or kit bag. It's built from premium quality components, such as Panasonic film capacitors, THAT Corporation VCA's, Switchcraft 3.5mm TRS Connectors and a robust outer shell with a smooth pink finish. The Bébé Chérie runs on a 12 volt DC external power supply, internally boosted for pro audio headroom. The Bébé Chérie is ideal for any application, it’s a versatile and contemporary mixer suitable for both studio and live performance. An essential item for anyone with a miniature synthesizer setup or anyone looking for a small analog mixer for their studio equipment.

Features

• Six-channel fully analog mixer for connecting 3.5mm TRS output hardware
• Compact and robust design makes it ultra-portable
• Four channels with a +34dB variable input gain, tilt EQ and an asymmetrical soft clipping harmonic distortion feature
• Two channels with no distortion, each with a Baxandall two-band EQ and an adjustable input gain
• Master bus with output volume control, headphone volume, a compressor and a bliss HF boost
• Bliss HF enhancer emphasizes the high frequencies adding air and depth, making them sharp and clear
• The 3:1 ratio compressor has a fast attack time and medium release time ideal for mixdowns
• Alternate output can be utilised for recording or sending channels to external FX
• Master and headphone output share volume gain and feature a low distortion and noise Texas Instruments amplifier
• Premium components such as Panasonic film capacitors, THAT Corporation VCA's, and Switchcraft 3.5mm TRS Connectors.

Specifications

Noise

(20 Hz - 20 kHz bandwidth, 600 Ohms impedance)

• All levels at min:
  • -96 dBu (Master Out)
  • -97 dBu (Alt. Out)
  • -91 dBu (Phones Out)
• All channel levels at min, Master level at unity:
  • -90 dBu (Master Out)
  • -97 dBu (Alt. Out)
  • -88 dBu (Phones Out)
• All channel levels at max, Master level at unity:
  • -88 dBu (Master Out)
  • -95 dBu (Alt. Out)
  • -87 dBu (Phones Out)

Distortion (THD+N)

(@500 Hz, +4 dB output level, 20 Hz - 20 kHz bandwidth)

• Channel 1 to Master Out: 0.012
• Channel 1 to Alt. Out: 0.013
• Channel 5 to Master Out: 0.008
• Channel 5 to Alt. Out: 0.009

Frequency response

(All Tilt, Hi and Lo pots at mid position)

• Channel 1 to 4: +15 dBu
• Channel 5 to 6: +18 dBu

Compressor

• Ratio: 3 :1
• Threshold: +10 to -30 dB
• Attack time: 2 ms
• Release time: 300 ms
• Max make-up gain: +20 dB

Attenuation

(@500 Hz, 0 dB output level, 20 Hz - 20 kHz bandwidth)

• Channel level at max and channel off: -91 dB
• Channel level at min and channel on: -86 dB
• Master level at min: -80 d

Impedances

• All inputs: 47 kOhms
• Master and Alt. Outs: 100 Ohms
• Phones out: 39 Ohms

Power supply

• Input: 100-240 V, 0.3 A, 50 / 60 Hz
• Output: 12V DC, 1 A, center positive
• Power requirements : 12 V DC, 0.5 A

General

• Dimensions: 290 (W) x 145 (D) x 62 (H) mm
• Weight: 1.34 kg
• Product code: BEBE-CHERIE