Discontinued Alesis iO2 USB Audio Interface

Ta izdelek trenutno ni naprodaj.

Discontinued Alesis iO2 USB Audio Interface Pregled

Ta opis je preveden iz angleščine - Originalni opis si lahko ogledate tukaj

Ta zvok in MIDI vmesnika iz Alesis vam ponuja fantastičen kakovosti instrument mik in Inlays za vašo opremo. Veliko prožnost namizni računalniki in prenosni računalniki, kakor je enota se napaja iz USB vrata.

Št. izdelka: 8708

Celoten opis

Ogled popolnega opisa

24-bit, 48 kHz operation with high-end A/D and D/A conversion through integrated USB audio interface

2 XLR mic inputs with 48V phantom power plus 2 1/4" balanced line inputs that can accept guitar level signals

1/4" balanced main outputs

1/4" TRS inserts on input channels

1/4" TRS headphone output

Dedicated four segment signal/clip LED meter on both channels

Ultra low-latency ASIO 2.0 drivers (with zero-latency hardware monitoring)

24-bit S/PDIF I/O for direct digital recording

MIDI Input/Output

USB powered�no external AC power supply necessary

Low power usage for minimal laptop battery drain

Bundled with Steinberg Cubase LE

Specifications:

FREQUENCY RESPONSE:

MIC/LINE IN to SPDIF/USB OUT: +/-0.1dB Input Gain = minimum

MIC/LINE IN to MAIN OUT (through ADC/DAC) +/-0.35dB Input Gain=minimum

SIGNAL-TO-NOISE RATIO (SNR):

MIC/LINE IN (balanced) to INSERT OUT: 110dB A-weighted, input impedance at XLR or 1/4" jack = 600 Ohms, Input Gain = minimum

GUITAR IN (unbalanced) to INSERT OUT: 99dB A-weighted, input impedance at 1/4" jack = 600 Ohms, Input Gain = minimum

MIC/LINE IN (balanced) to SPDIF/USB OUT: 99dB A-weighted, input impedance at MIC or LINE jack = 600 Ohms, Input Gain = minimum

GUITAR IN (unbalanced) to SPDIF/USB OUT: 94dB A-weighted, input impedance at 1/4" jack = 600 Ohms, Input Gain = minimum

MIC/LINE IN (balanced) to MAIN OUT (through ADC/DAC): 97dB A-weighted, input impedance at MIC or LINE jack = 600 Ohms, Input Gain = minimum

MIC/LINE IN (balanced) to MAIN OUT (through direct monitor): 95dB A-weighted, input impedance at MIC or LINE jack = 600 Ohms, Input Gain = minimum

TOTAL HARMONIC DISTORTION + NOISE (THD+N):

MIC/LINE IN (balanced) to INSERT OUT: